Posts Tagged ‘Delphi Water Ionizer’

Water Ionizer Electrode Plates: Mesh or Solid?

Friday, May 1st, 2009

I’ve been getting this question more often lately, and I thought I’d address it here, publicly. Both types of plates are a titanium base coated with platinum. A lesser quality plate is merely sprayed with platinum, and I won’t address those here. Let’s talk about the electrode plates that are coated with platinum, not sprayed, because these are in the ionizer brands I carry.

The water I carry have both types of plates. The Aquifer, Affinity and Odyssey are made by Yi-Shan in Taiwan and all have large, solid titanium electrode plates coated with platinum. Yi-Shan has been making water for over 30 years, and due to the extreme durability of these “heavy duty” electrode plates, we are seeing life spans of 15-20 years with these machines, above the more usual 10-15 year life span.

Mesh electrode plates are rather new to the market, untested over time. A titanium plate is stamped to create the mesh, with dips and valleys then coated with platinum. The platinum layer is thinner, less durable and less expensive to make than solid electrode plates. Jupiter water , like the Orion and Delphi, use this type of electrode plates.

The two brands of water were tested against each other for quality of output using a machine from each company with five electrode plates. The pH and ORP tested the same, so in terms of water ionizing ability, there is basically no difference.

The difference lies in the durability and longevity, which a consumer cannot tell until time passes. Please remember there is much competition, therefore much hype in the world these days as in “new technology” and “more electrode plates” being promoted vigorously. It’s like a certain famous garden rototiller – they used to be made super well, known for lasting years and years and years, but over time this company cut corners and switched to less-expensive, lower quality parts and now they wear out much faster necessitating costly repairs.

When comparing water , take into consideration the type of plates along with all the other features. Read more about shopping for a water ionizer.

Tags: , , , , , , ,
Posted in Uncategorized | 2 Comments »

Where to Install an Ionizer

Friday, March 13th, 2009

under counter water ionizer fission

Most times a counter-top is installed on the counter next to the sink, but here are a few other suggestions that may be more convenient and more efficient use of kitchen space.

Of course, if you’re lucky enough to have a wide window sill in the sink’s vicinity, this makes a great location – off the counter and still within easy reach. Most have a small footprint and will sit securely on a 4″-5″ windowsill. I used this option when I lived in Florida.

You might have a pass-through near your sink where you can spare some space. If the ionizer fits crosswise in the opening, the back would face the width of the wall. If not, and the ionizer front faces into the kitchen you might like to put a photo of you and your sweetheart, or even your kids to obscure the back view. Or perhaps a photo of your parents who made you so smart that you got a ! My mother uses this option.

Many water come with a wall-mount bracket. These work GREAT and often this installation uses unused space. As an alternative, or if your ionizer didn’t include the wall mount option, a sturdy shelf, securely mounted works too. Be sure to mount either option up high enough NOT to interfere with counter use. I have a wall-mounted ionizer in my kitchen.

Another overlooked option is installing the ionizer in the bathroom (on the counter or wall mounted) or laundry room. When my son lived with roommates, he installed his in his own bathroom, and my brother installed his in the laundry room. It all works!

My daughter and son-in-law set the ionizer on the counter, BEHIND the drain board – they simply moved the drain board a bit closer to the counter edge. This worked well in a tiny apartment kitchen, where they didn’t even have room for the wall option. They recently bought a house in Philadelphia, and have done a “custom” installation, which brings me to the final option:

You may not be aware that without investing in an under counter , you can install the ionizer under the sink. This is what my kids did. This is a bit more complicated than above the sink, but it can work. I carry an Under the Counter Conversion Kit (email or call me) that has an above counter double spout – one for alkaline, with the other just underneath it for acid water. There needs to be an extra hole in your countertop or you’ll need to have one professionally drilled. The ionizer gets mounted on the interior side wall of the cabinet below the sink, or on the door if it’s sturdy enough and the hinges are well crafted. Of course you can always have the simply sit on the floor of the cabinet.

A plumber is needed to hook the conversion kit up to your cold water line. (HOT WATER should NEVER be run through an ionizer.) There are several hoses to connect, and depending which ionizer you have, you may need some connectors and/or fittings to make it all work properly. A handy person who knows a bit about plumbing may be able to do this without a plumber.

poseiden under thecounter water ionizer

When it’s all hooked up, you choose your alkaline or acid settings from the unit down below, but the waster comes out on top. Choosing the settings from inside the cabinet is the one drawback of a counter top installed to be an under counter .

Starting at $1,999, you can have a true under counter model – the Poseidon Under Counter , and the second photo is the Delphi Under Counter Ionizer ($2,645). Email me if you’re want more information, as the Poseidon and a third one is not up on the site yet. You can then choose your ionizer settings from the stem of the faucet on top of the sink. I carry three different models and the choice really comes down to aesthetics versus cost.

Anyway you mount it, is the water of choice – and drink lots of it!!!

Tags: , , , , , , , ,
Posted in Tinas Tidbits | No Comments »